How to Install a Dart Throw Line Sticker

If you’re a dart player or enthusiast, then having a perfect throw line to help you aim is essential. One of the quickest and most accurate ways to guarantee pinpoint accuracy in your shots is by investing in a vinyl sticker Throw Line. These stickers provide a clear visual reference point for where players should stand when throwing their darts.

To install a dart throw line sticker, gather materials, measure the area, clean the surface, align the sticker using a ruler, press it down, and trim excess.

With its seamless application, it allows for an easy setup as well as perfectly determining the placement of where your feet must land every time before taking any shot. It’s also reusable so can be easily applied even if moving from one area to another! This blog post will show you exactly how to install a dart throw line sticker – read on for more information!

Materials Needed for installing a dart throw line sticker

  1. Dart Throw Line Sticker
  2. Measuring Tape or Ruler
  3. Level
  4. Masking Tape (optional)
  5. Rubbing Alcohol and Cloth (for cleaning)

Preparing to install a dart throw line sticker can be an exciting process, especially if you’re eager to upgrade your game room or practice space. Before beginning the installation process, it’s essential to gather all of the necessary materials you’ll need to complete the job with ease. The first item you’ll need is a dart throw line sticker, which can typically be purchased at a local game store or online.

You’ll need a ruler or tape measure to ensure the sticker is installed at the correct distance from your dartboard. With these materials in hand, you’ll be well on your way to a successful installation and a more enjoyable dart-playing experience.

How to Install a Dart Throw Line Sticker Step-by-Step Guide

Following is the step-by-step guide on how to install a dart throw line sticker.

1. Choose the Right Location

Select a suitable spot on your floor where you want to place the dart throw line sticker. This should be an area with adequate lighting and sufficient space for comfortable gameplay. Make sure it’s a flat and clean surface.

2. Measure and Mark

Use a measuring tape or ruler to determine the official throwing distance for darts, which is typically 7 feet 9 1/4 inches (237 cm) from the face of the dartboard. Measure this distance from the center of the bullseye to where the player’s feet should be positioned.

Taking the extra time to get exact measurements will ensure that your sticker looks like it is meant to be there, seamlessly blending into the rest of your layout. So, break out your ruler or tape measure and get to work – you won’t regret it!

3. Clean the Area

Clean the designated area thoroughly with rubbing alcohol and a cloth to remove any dirt or debris that might affect the sticker’s adhesion.

4. Position the Sticker

Peel off the backing of the dart throw line sticker, exposing the adhesive side. Carefully position the sticker on the floor at the marked distance. Ensure that the sticker is aligned parallel to the dartboard and centered with the bullseye.

5. Secure the Sticker

Press down firmly on the sticker to ensure proper adhesion. You can also use a level to double-check that the sticker is perfectly straight. If needed, use masking tape to temporarily secure the sticker in place while you check for alignment.

6. Test the Position

Stand behind the sticker at the specified throwing distance and check if your eyesight lines up with the dartboard’s bullseye. Make any necessary adjustments to the sticker’s position if your alignment is off.

7. Allow Adhesion Time

It’s recommended to let the sticker adhere for a few hours before playing darts on it. This ensures that the adhesive sets properly and prevents any accidental shifting.

8. Use a utility knife or scissors to trim any excess material from around the edges of the sticker

You’ve just finished putting a new sticker onto your laptop, but there’s one more step to make it look perfect. Take out your trusty utility knife or scissors, and carefully trim away any excess material from around the edges of the sticker.

This step will give your sticker a polished and professional look, without any unsightly bits of excess material hanging around. Plus, it will ensure that your sticker stays securely in place for as long as possible. Don’t skip this crucial last step and let your sticker stand out in all the right ways!

Maintenance Tips

  • Avoid dragging your feet over the sticker to prevent its edges from lifting.
  • Clean the sticker occasionally to remove dirt or residue that could affect your stance.
  • If the sticker starts to show signs of wear or lifting, consider replacing it to maintain accuracy.


In the end, we hope now you have a better understanding of how to install a dart throw line sticker. Installing a dart throw line sticker is a simple process that requires very few materials and can be accomplished with the help of basic tools. With a little patience and the right supplies, you will be able to easily make the most of this award-winning piece of equipment and enjoy your dart game for years to come.

We give you all the necessary information for the successful installation of the throw line sticker, however, if you do ever encounter any difficulties during this project, there is no shortage of resources available online which can be consulted to provide further advice or help. So now that you know how to install a dart throw line sticker, what are you waiting for? Get those darts ready and start flinging!


If you’ve still got questions about how to install a dart throw line sticker, then these may help:

What are the lines on a darts mat?

The lines on a darts mat, often called the oche or throw line, mark the distance players must stand from the dartboard when throwing. They ensure fair and consistent play.

How do you measure a dart throw line?

Measuring a dart throw line involves marking the oche, which is 7′ 9.25” from the front face of the steel tip dart board. This distance, also known as the toe line, is crucial for fair play.

Where do you put the dart throw line?

The dart throw line, or oche, is placed 7 feet 9.25 inches from the face of the dartboard, measured horizontally along the floor. This ensures standardized play.

What is a darts line called?

The line in darts from which players throw is commonly known as the “oche” (pronounced “ockey”). It ensures all players throw from the same distance.

What is the throwing line in darts?

The throwing line in darts, known as the “oche”, is the line players must stand behind when throwing their darts. It’s positioned 7 feet 9.25 inches from the dartboard.

How many feet is the dart line?

The dart line, also known as the oche, is positioned 7 feet 9.25 inches from the face of the dartboard. This is the standardized distance for official play.

1 thought on “How to Install a Dart Throw Line Sticker”

Leave a Comment