Note: We are the partner of the Amazon affiliates program, This article may contain affiliate links We may earn from qualifying purchases at no additional cost to you.
Hanging a dartboard on a brick can be tricky. You don’t want to damage your wall, and you need to make sure the board is level.
If you’ve ever tried to hang a dartboard on brick, you know it can be a real challenge. The wrong tools or techniques can damage your wall, or even worse, cause the board to fall off the wall.
In short, to hang a dartboard on brick, first, find the center of the board. Then, use a hammer and nail to make two pilot holes in the brick. Next, Insert wall anchors into the pilot holes. Finally, use screws to secure the dartboard to the wall anchors.
If you’re still not sure I’m here to help. In this article, I’ll explain how to hang a dartboard on a brick using the right tools and techniques. I’ll also provide tips for ensuring that your board is level and secure.
How To Hang A Dartboard On Brick? – 7 Steps
Here are the top 7 steps to follow when hanging a dartboard on brick:
1. Choose The Right Type Of Hardware
One of the most important steps in hanging a dartboard on a brick is to choose the right type of hardware. You’ll need two types of screws: masonry screws and wall anchors.
Masonry screws are made of hardened steel and have sharp threads that cut into brick. They’re also corrosion-resistant, so they won’t rust over time. Wall anchors are made of plastic or metal and expand when you screw them into the wall. This expansion creates a tight fit, which prevents the anchor from being pulled out of the hole.
When choosing masonry screws, look for screws that are at least 3 inches long. Shorter screws won’t grip the brick as securely and could cause the board to fall off the wall. As for wall anchors, there are a variety of types available. Choose an anchor that is rated for the weight of your dartboard and the type of brick wall you have.
2. Find The Center Of The Board
The next step is to find the center of the board. You can do this by measuring the width and height of the board. Then, use a pencil to mark the center point at the intersection of these two measurements.
3. Measure And Mark The Pilot Holes
Once you’ve found the center of the board, it’s time to measure and mark the pilot holes. To do this, hold the board against the wall in the desired location. Then, use a tape measure to find the distance between the top two screws on the board.
Next, use a pencil to mark the location of the pilot holes on the wall. Make sure these marks are level with one another. Finally, use a ruler or straight edge to draw a line between the two marks. This line will help you make sure that the screws are level when you drill them into the wall.
4. Drill The Pilot Holes
Now it’s time to drill the pilot holes. First, put on safety glasses to protect your eyes from flying debris. Then, use a drill bit that is slightly smaller than the diameter of your masonry screws.
To drill the holes, hold the drill perpendicular to the wall and start drilling at a slow speed. Once the bit has penetrated the surface of the brick, increase the speed and continue drilling until the hole is deep enough to accommodate the screw. Repeat this process for the second pilot hole.
5. Insert The Wall Anchors
After drilling the pilot holes, it’s time to insert the wall anchors. To do this, simply insert the anchor into the hole and tighten it in place with a screwdriver.
6. Secure The Board To The Wall
Finally, it’s time to secure the board to the wall. Start by holding the board in place and threaded inserting a masonry screw into each pilot hole. Then, use a drill or screwdriver to tighten these screws until their snug against the board. Be careful not to overtighten the screws, as this could strip the threading or damage the brick.
7. Hang The Darts And Enjoy!
Now that your dartboard is secure on the wall, it’s time to hang the darts and enjoy! If you follow these steps, your board should be level and sturdy. Just make sure to check the screws periodically to make sure they’re still tight.
And that’s it! These are the steps you need to follow to hang a dartboard on a brick. Just remember to take your time and be careful, and you’ll be playing darts in no time. Thanks for reading along!
Things To Keep In Mind When Hanging A Dartboard On Brick
Here are some steps to follow when hanging a dartboard on brick:
- Choose the right type of adhesive. Many adhesives on the market claim to work on brick, but not all of them will provide a strong and lasting hold. Look for an adhesive that is specifically designed for use on brick or other masonry surfaces.
- Clean the surface where you will be applying the adhesive. Any dirt, dust, or grease can weaken the bond between the adhesive and the brick, so it’s important to start with a clean surface.
- Apply the adhesive according to the manufacturer’s instructions. This step is important because if you don’t apply the adhesive correctly, it won’t adhere properly to the brick and could fall off easily.
- Press the dartboard into place and hold it there for a few seconds to give the adhesive time to start bonding.
- Leave the dartboard in place for at least 24 hours before hanging any darts on it. This will give the adhesive time to fully cure and achieve maximum strength.
Things To Avoid When Hanging A Dartboard On Brick
There are a few things you should avoid when hanging a dartboard on brick:
- Don’t use regular nails or screws. The vibration from the darts will cause them to loosen and fall out.
- Don’t use adhesives like duct tape or super glue. They won’t hold the dartboard securely in place.
- Do use specialized wall anchors that are specifically designed for hanging things on brick walls. These will ensure that your dartboard stays securely in place.
Conclusion
So there you have it – a foolproof guide on how to hang a dartboard on a brick. Whether you’re an experienced darts player or just looking for a new way to entertain guests, follow these simple steps and you’ll be up and throwing in no time. And remember, practice makes a man perfect!
FAQs
If you’ve still got questions about how to hang a dartboard on brick, then these may help:
How do you hang a dart board without drilling?
There are a few ways to hang a dartboard without drilling. One way is to use adhesive strips or Command strips. Another way is to use velcro. Finally, you can also use nails or tacks.
How do you put up a dart board on plaster?
If you want to put up a dart board on plaster, you will need to use an adhesive that is made for plaster walls. You can find these adhesives at most hardware stores. Once you have the adhesive, simply follow the instructions on the package.
What is the correct height to hang a dartboard?
The standard height to hang a dartboard is 5 feet 8 inches. However, you can adjust the height to suit your needs. If you are shorter or taller than average, you may want to adjust the height accordingly.
Can you put a dartboard on any wall?
You can put a dartboard on any wall as long as the wall is flat and sturdy. However, it is best to avoid putting the dartboard on a wall that has been recently painted or papered, as the adhesive may not stick well.
What is the standard size of a dartboard?
The standard size of a dartboard is 18 inches in diameter. However, there are also smaller and larger sizes available. If you are unsure of what size to get, it is best to consult with a professional before making your purchase.